The MILLREX is a split torque reduction gear designed for side drives for cement mills and raw mills.
Advantages
Compact solution
The smallest and simplest form of civil engineering
The quickest fitting
Though mechanically welded housing
Technical description
Complying with design standards, procedures and instructions laid down in ISO 9001
Housing :
Tough welded housing
Gearing :
All Millrex gears, including the 2 driving gears are made of 18 CrNiMo7-6 case hardening steel.
After cutting, gears are hardened, tempered and ground.
In conformity with ISO 6336, gearing life is 100 000 hours.
Bearings :
Bearings are calculated to have a theoretical minimum life of 100 000 hours L10, excluding factor a23, in conformity with ISO 281.
Driving gears :
The standard version is built with 2 self-aligning gears.
