The CANEFLEX reduction gear has been specially designed for milling cane sugar. A range of 5 sizes covers all capacities of washers and mills.
The standard CANEFLEX reduction gear is designed for input speeds of between 600 rpm and 1 800 rpm and output speeds of between 3 rpm and 7 rpm .
The output shaft and bearing are designed to take the loads induced by the tail-bar. The CANEFLEX reduction gear is easy to fit - the result of long experience in this field .
Diffusion processes
CMD proposes a BOGIFLEX drive system - a self-aligned shaft mounted reduction gear - for vertical and horizontal diffusion processes.
The light, modular drive units allow high torque capacities.
When driving vertical systems, the torque delivered by a BOGIFLEX reduction gear of the BPF type on the ring gear is around 16 kNm to 120 kNm. The input speed variation is from 300 rpm to 1500 rpm .
For the horizontal diffusion tube drive, CMD provides a solution based on BOGIFLEX planetary reduction gears (BFT type). Each reduction gear can accept torques of between 6 kNm and 50 kNm. The output rotation speed of the reduction gear is very slow: between 0.1 rpm and 0.2 rpm .
The 
